(07) 3262 1744

 

Liquid Applied Membranes

Showing 1–9 of 10 results

Image Product Code Product Name Price Quantity
FC000625-10L Fosroc Nitoproof 510 Part A 10 litre

To be used with FC000626-10L Nitoproof 510 is a grey, two-component, epoxy coating. When applied at 300 microns dry film thickness will provide a moisture barrier coating to restrict passage of dampness through concrete and masonry substrates. NOTE: this new formulation is NOT compatible with the previous base & hardeners. Typical Applications Interior faces of walls Floors Basements Tunnels Cellars Retaining walls Lift wells Underground car parks Advantages Solvent Free Very Low VOC Emission Anti-microbial Formulation Very Low Odour Compatible with damp substrates Compatible bonding of most subsequently applied coatings, bonding agents, and water based adhesives Water based with no odour or volatile emissions Easy clean up using water Excellent adhesion to a variety of substrates including, concrete, brick, masonry, block, compressed fibre board, stone and timber Improved coverage rates Improved coverage rates
$192.4210
OUT OF STOCK 3to 5 Days
FC000626-10L Fosroc Nitoproof 510 Part B 10 litre

To be used with FC000625-10L Nitoproof 510 is a grey, two-component, epoxy coating. When applied at 300 microns dry film thickness will provide a moisture barrier coating to restrict passage of dampness through concrete and masonry substrates. NOTE: this new formulation is NOT compatible with the previous base & hardeners. Typical Applications Interior faces of walls Floors Basements Tunnels Cellars Retaining walls Lift wells Underground car parks Advantages Solvent Free Very Low VOC Emission Anti-microbial Formulation Very Low Odour Compatible with damp substrates Compatible bonding of most subsequently applied coatings, bonding agents, and water based adhesives Water based with no odour or volatile emissions Easy clean up using water Excellent adhesion to a variety of substrates including, concrete, brick, masonry, block, compressed fibre board, stone and timber Improved coverage rates
$225.0390
OUT OF STOCK 3to 5 Days
FC000600-4L Nitoprime 115 Non Porous 4 litre

Nitoprime 115 is a water based primer specifically designed with adhesion enhancing properties for use onto metallic, smooth, dense, and non porous surfaces. Typical Applications Priming non-porous surfaces prior to applying water based waterproofing membranes Advantages Low VOC Suitable as primer over non-porous surfaces for Nitoproof water based membranes Non-flammable and free of hazardous odours Suitable for internal and external priming applications Fast drying Excellent water resistance Cost effective alternative to grinding and etching surfaces
$105.0590
OUT OF STOCK 3to 5 Days
FC000601-15L Nitoprime 120 Primer 15 litre

Nitoprime 120 is a single component fast drying primer that provides excellent high bonding and penetrating properties into concrete and masonry surfaces before applying Nitoproof water based membranes. Advantages *Low VOC *Suitable for internal and external priming applications for all Nitoproof water based membranes *Fast drying *Solvent free, non flammable and free of hazardous odours
$140.7250
IN STOCK
FC000605-15L Nitoproof 210 15 litre

Nitoproof 210 is a high performance single component water based bituminous rubberised liquid applied waterproofing membrane which contains root inhibiting additives. Typical Waterproofing applications such as retaining walls, planter boxes, building foundation walls & below ground tanking structures. Advantages: *Self priming on most common substrates (refer Priming) *Excellent cold flexibility and elongation *Contains root penetration inhibitor *Low VOC *Fast drying *Excellent resistance to ponding water *Non-toxic *Non-flammable
$154.2250
IN STOCK
FC000602-15L Nitoproof 310 Under Tile 15 litre

Nitoproof 310 is a fibre enhanced single component water based latex liquid applied membrane that has been designed for waterproofing applications where the membrane is to be covered over with tiles, screeds, concrete beds. Advantages: *Low VOC *Non-hazardous *Elastomeric and flexible with good tensile strength properties *Once cured will not re-emulsify *Excellent chemical resistance *Excellent adhesion to primed surfaces *Compatible bonding properties for tile adhesives screeds and renders *Complies with AS4858:2004
$169.2120
OUT OF STOCK 3to 5 Days
FC000627-15L Nitoproof 610 15 litre

Nitoproof 610 is a single component polyurethane liquid which cures by reaction with atmospheric moisture to give a tough elastomeric waterproofing membrane. It is supplied as a thixotropic liquid which is easily applied at the recommended thickness to both vertical and horizontal surfaces. Typical Applications: Foundations Basements Tunnels Ground floors Suspended floors Roof terraces Balconies Patios Bridges Advantages: High elongation Readily applied direct from can - (no mixing required) Cures to give permanently flexible resilient barrier over a wide range of temperatures Can be applied to a wide range of substrates Outstanding barrier properties ensure protection against corrosive soil conditions Irreversible chemical cure eliminates melting and flow at high temperature Excellent resistance to embrittlement Pitch free formulation
$158.0870
OUT OF STOCK 3to 5 Days
FC000608-15L Nitoproof 810 15 litre

Nitoproof 810 is a water based polyurethane single component membrane designed for a wide range of waterproofing applications in the built environment. Nitoproof 810 is an alternative to solvent based and moisture curing polyurethane membranes. Advantages *Can be flood tested after 48 hours @ 23°C/50% RH *Low VOC *Elastomeric and flexible with excellent elastic recovery *Will not re-emulsify, once cured. Handles permanently wet conditions *Low water absorption *Low water vapour transmission properties *Excellent adhesion to primed surfaces *Compatible bonding properties for tile adhesives (such as Nitotile Flex), screeds and renders *Non-flammable and non-hazardous *Complies with AS/NZS 4654.1:2012 *Complies with AS/NZS 4858:2004
$187.4730
OUT OF STOCK 3to 5 Days
FC000607-15L Nitoproof Top Coat Extended Wear 15 litre MTO

Nitoproof Top Coat EW is a solvent free hybrid sealer designed for use over Nitoproof Top Coat UV to improve stain resistance and scuff marks associated with pedestrian foot traffic. Nitoproof Top Coat EW exhibits excellent UV resistance and durability. Typical Applications Sealing over Nitoproof Top Coat UV membrane coating to improve stain resistance, durability and weathering properties Advantages Low VOC Compatible over Nitoproof Top Coat UV Excellent resistance to UV degradation and carbonation Solvent free, non flammable and free of hazardous odours Excellent chemical and water resistance Clear non-yellowing finish

Sold in multiples of: 55
$220.5770
OUT OF STOCK 3to 5 Days